Differences for page Requests for new features -- hping network security tool

hping wiki

Differences for page Requests for new features

Current version compared with version Sat Jan 05 21:16:51 GMT 2008

...
  ----
  [soul] 28October2006: Could you add SOCKS4/5, HTTP proxy, FTP Tunnel support to hping3?  That way we could send tcp/udp packets via these proxies to scan/check around firewalls or blackholes.  Cheers!
  [zhenwu] 11/6/2007: Is it possible to add support for modifying src/dst MAC?
+ 
  -----
- [me] 06/1/2008: Not sure here: Is it possible to add support for overcross Spoofing of TCP/IP Connections?+ [me] 06/1/2008: Not sure here: Is it possible to add support for overcross Spoofing of TCP/IP Connections?
+

The following is the old page content

What a missing feature? Please write what you need in this page.
----
[RobinVossen] 2007 (http://www.linuxforums.org/forum/members/robinvossen.html)
I am missing a way to send Crafted ARP packages with hping.
=====================================================================================================================
2006 june [Francois Malard]
Is there a gui interface project ?
Like nmap-frontend -> Id like to do that [RobinVossen] contact me at LinuxForum.org
=====================================================================================================================
[DavidSanchez] : I've been given an old router by a friend of mine. The problem is we don't know its IP address (he never knew it). Any way to find the ip address using hping ? I made a script which pings broadcast address of all-possible private LAN subnets... I suppose there's some protocol better suited than just echo requests. Would it be possible to implement a solution to find the LAN IP range in hping ? (my apologies if it exists and I couldn't find it ).  
----

[AndreiDarashenka] 6/11/2004 hping2 feature request: flood mode
Please make plain sendip loop without "(but not as fast  as  your computer can send packets due to the signal-driven design)"

I need to test my server to ability work under DDOS condition. I don't need to receive packets, only send with random source/dest IP.

I can make a patch for you.
----
[anon] 13June2004: Windows port?
----
[antirez] 18May2004: ability to set [ECN] bits from command line and support for it in [APD].
----
[antirez] 18May2004: [scan mode] working with [UDP].
----
[Verbato(NO)] 17June2004: [audible ping] with [ICMP].

[antirez] 18June2004: implemented in hping3 CVS. Another new feature is --flood to
send packets as fast as possible.
----
Try all combinations of flags.
----
[mark] 10Sept2004: combine old and new ways of calling - e.g.:
 $ hping3 --interface en0 --frag exec ping.htcl www.google.com
 hping: you must specify only one target host at a time
----
[alan] Dont even know if it is a feature that fits in the hping paradigm. I want to test icmp transmission
across the internet. So I would like to be able to set up an unattended hping 'echo' server at a remote site. 
Concept, establish tcpip session to server, recieve random large key, all future hping echo requests require 
the key, I send a tcpip packet containing key + icmp packet server sends it back. Use 1: test pathMTU and 
whether or not packets are getting eaten.... Dont know if the echo server would have to refuse to return 
some kinds of packets. TO add to security it could be configured to respond to only certain static ip addresses. 
Is there some other tool for this, or a port any port anywhere that advertises itself as being on the end of 
a low MTU link. 
----
[jake] 7March2006: what is the status of IPv6 support within the Hping3 code base?  I would be interested in extending Hping3 to support TCP/UDP/ICMPv6 packet generation.
jacob.jacobsenATus.army.mil
----
[anon] 26June2006: When I attempt to pipe hping2 output to tee in order to view and capture it at the same time, tee will not actually display the output on the screen until the execution is over. I've never seen this behavior with tee before. ping, for example, will display each ping as it occurs. I am using hping2 to test connectivity and I need to be able to save results while at the same time monitoring progress so I can know when there are connection issues. Is there another way I can accomplish this? hping2 is the only tool I have found that can give me the degree of control I need over the packets I send, but I simply can't use it for my purposes because of this issue. Capturing the screen afterwards is not a viable solution either.
----
[solipsist] This is because it is buffering standard output, using the ANSI standard FILE functions, whereas ping uses write(2) which is Unix standard and unbuffered.  If it generates enough output, you should see the output before the whole program is over.  "man setlinebuf" if you want to hack some source.
----
[anon] Thanks. I am using the windows port of hping through cygwin so I had to use setvbuf. Line buffering couldn't be set for some reason, but no buffering worked perfectly. It was an easy change to main.c, so maybe this option should be included as a switch in a future release.
----
The interactive hping/tcl send command needs to have a way of specifying the outgoing interface the same way the recv command can.
----
[soul] 28October2006: Could you add SOCKS4/5, HTTP proxy, FTP Tunnel support to hping3?  That way we could send tcp/udp packets via these proxies to scan/check around firewalls or blackholes.  Cheers!
[zhenwu] 11/6/2007: Is it possible to add support for modifying src/dst MAC?
-----
[me] 06/1/2008: Not sure here: Is it possible to add support for overcross Spoofing of TCP/IP Connections?